Yanmar SK1550 Скачать руководство пользователя страница 71

Страница: 71 / 99

Service - 70

SK1550 Operator’s Manual

Recommended Lubricants

Approved Fuel

This engine is designed to run on diesel fuel. Use only high quality fuel meeting ASTM D975 No. 2D,

EN590, or equivalent. At temperatures below 32°F (0°C) winter fuel blends are acceptable. See the engine

manual for more information.

Biodiesel blends up to 5% (B5) are approved for use in this unit. The fuel must meet the specifications for

diesel fuel shown above. In certain markets, higher blends may be used if certain steps are taken. Extra

attention is needed when using biodiesel, especially when operating in cold weather or storing fuel.

Contact your Ditch Witch® dealer or the engine manufacturer for more information.

Exhaust Cleaning

This engine has a Diesel Particulate Filter (DPF) that purifies NOx emissions in the exhaust into nitrogen

and water. The DPF system cleans itself automatically, unless it is manually disabled by the operator.

Automatic exhaust cleaning happens during normal machine operation when sensors in the

engine determine the need. During an engine exhaust cleaning cycle, engine exhaust can reach

high temperatures. When this happens, the high exhaust temperature icon will light.

If the jobsite is in an area where high exhaust temperature might cause a problem,

disable exhaust

cleaning for the duration of the job and return to automatic cleaning when the job is finished. The

exhaust cleaning disabled icon will light and remain on until the system is returned to automatic

cleaning mode.

The exhaust cleaning icon will light when the system is disabled and exhaust cleaning cycle is

needed.

• The icon will light when an automatic cleaning is needed. If the area will allow it, return the machine

to automatic cleaning mode and let it run automatically.

• A manual exhaust cleaning cycle is required after automatic exhaust cleaning has been disabled

multiple times. If manual cleaning is not done when indicated, the engine will derate.

• Ash buildup in DPF will have adverse effects on engine performance. The soot filter must be serviced

every 3000 hours of operation or more often if high-ash oil and/or fuel is used. See your Yanmar

engine distributor for this service.

Ultra Low Sulfur Diesel (ULSD) poses a greater static

ignition hazard than earlier diesel formulations with higher sulfur content.

Avoid death or serious injury from fire or explosion; consult with your fuel

or fuel system supplier to ensure the delivery system is in compliance

with fueling standards for proper grounding and bonding practices.

NOTICE:

Use only Ultra Low Sulfur Diesel (less than 15ppm sulfur content in the US and Canada or

10mg/kg in EU and Japan) in this unit. Operating with higher sulfur content will damage the engine and

aftertreatment device.

Содержание SK1550




































































































Результаты поиска

Содержание SK1550

Отзывы:

Похожие инструкции для SK1550

Бренды по названию

Популярные бренды

Yanmar SK1550, Руководство оператора

Результаты поиска

Содержание SK1550

Отзывы:

Похожие инструкции для SK1550

Бренды по названию

Популярные бренды