Yanmar SK1550 Скачать руководство пользователя страница 4

Страница: 4 / 99

SK1550 Operator’s Manual

Overview - 3

Intended Use

Intended Use

The SK1550 is a platform, rubber track compact tool carrier unit designed for medium-duty construction

work. The machine has a quick attach plate which makes it easy for an operator to connect different

attachments.

This machine is intended for operation only according to the instructions in this manual. Operate machine

in ambient temperatures from 10° to 115°F (-12° to 46°C). Contact your Ditch Witch® dealer for provisions

required for operating in extreme temperatures. Use in any other way is considered contrary to the

intended use.

This machine should be operated, serviced, and repaired only by professionals familiar with its particular

characteristics and acquainted with the relevant safety procedures.

Equipment Modification

This equipment was designed and built in accordance with applicable standards and regulations.

Modification of equipment could mean that it will no longer meet regulations and may not function

properly or in accordance with the operating instructions. Modification of equipment should only be

made by competent personnel possessing knowledge of applicable standards, regulations, equipment

design functionality/requirements and any required specialized training.

Содержание SK1550




































































































Результаты поиска

Содержание SK1550

Отзывы:

Похожие инструкции для SK1550

Бренды по названию

Популярные бренды

Yanmar SK1550, Руководство оператора

Результаты поиска

Содержание SK1550

Отзывы:

Похожие инструкции для SK1550

Бренды по названию

Популярные бренды