Yanmar SK1550 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 99

background image

Safety Awareness - 14

SK1550 Operator’s Manual

Emergency Procedures

If an Electric Line is Damaged

If you suspect an electric line has been damaged, DO NOT MOVE. Take the following actions. The order

and degree of action will depend on the situation.

• If you are

on the machine,

REMAIN ON MACHINE. Raise attachments and drive from immediate area.

•

If you are

off the machine

,

• DO NOT TOUCH ANY EQUIPMENT.
• If you must leave the area, take small steps with feet close together to reduce the hazard of being

shocked from one foot to the other.

• Warn people nearby that an electric strike has occurred. Instruct them to leave the area.
• Have someone contact electric company to shut off power.
• If you leave the area, do not return to jobsite or allow anyone into area until given permission by

utility company.

If a Gas Line is Damaged

If you suspect a gas line has been damaged, take the following actions. The order and degree of action will
depend on the situation.

• Immediately shut off engine(s), if this can be done safely and quickly.
• Remove any ignition source(s), if this can be done safely and quickly.
• Warn others that a gas line has been cut and that they should leave the area.
• After warning others to leave the area, leave jobsite as quickly as possible.
• Immediately call your local emergency phone number and utility company.
• If jobsite is along street, stop traffic from driving near jobsite.
• Do not return to jobsite until given permission by emergency personnel and utility company.

If a Fiber Optic Cable is Damaged

Do not look into cut ends of fiber optic or unidentified cable. Vision damage can occur. Contact utility
company.

If Machine Catches on Fire

Perform emergency shutdown procedure and then take the following actions. The order and degree of

action will depend on the situation.

• Immediately move battery disconnect switch (if equipped and accessible) to disconnect position.
• If fire is small and fire extinguisher is available, attempt to extinguish fire.
• If fire cannot be extinguished, leave area as quickly as possible and contact emergency personnel.

«
...
13
14
15
16
17
...
»

Содержание SK1550




































































































Отзывы:

Нет отзывов

Похожие инструкции для SK1550

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды