Yanmar SK1550 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 99

background image

SK1550 Operator’s Manual

Prepare - 29

Prepare Equipment

Hydraulic Connection

If attachment requires hydraulic power for operation, connect hydraulic hoses.

1. Ensure machine is shut off.
2. Activate accessories using ignition switch.
3. Operate auxiliary controls to relieve residual

pressure at hydraulic couplers.

4. Remove dirt and debris from hydraulic

couplers.

5. Connect male coupler from attachment to

female coupler (3) on machine.

6. Connect female coupler from attachment to

male coupler (1) on machine.

7. If needed, connect attachment case drain

hose to case drain connector (2).

8. Ensure that connections are secure by pulling on hoses.

Pressurized fluid or air. Injection can cause death or

serious injury. Refer to operator’s manual for correct use.

To help avoid injury:

• Use a piece of cardboard or wood, rather than hands, to check for leaks.
• Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
• Lower, block, or support any raised component with a hoist.
• Cover connection with heavy cloth and loosen connector nut slightly to relieve residual pressure.

Catch all fluid in a container.

• Before using system, check that all connections are tight and all lines are undamaged.
• If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.

Hot parts. Contact can cause burns. Only touch when cool

or wear gloves.

IMPORTANT:

Right side is medium flow and left side is high/low flow.

«
...
28
29
30
31
32
...
»

Содержание SK1550




































































































Отзывы:

Нет отзывов

Похожие инструкции для SK1550

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды