Yanmar 4JH3-TE, Руководство по эксплуатации

Страница: 46 / 65

42 5. MAINTENANCE & INSPECTION
(4) Replacing the Marine Gear Oil and Washing the Oil Filter (2nd time)
Replace the marine gear oil for the 2nd time.
Wash the filter at the same time.
→
See 5.2.1(2)
(5) Adjusting the Remote Control Handle
The remote control handles and the engine speed control lever and clutch shifting lever are connected by an
remote-control cable. Over time the cable becomes stretched and the connections loose causing deviation in
the position which makes operation unsafe. Inspect the wire periodically and adjust if necessary.
(5A) Adjusting the Governor Remote Control Handle
1. Check to see that the speed control lever on the
engine side is touching the high speed limiting
bolt(high idle) when the governor handle is put in
H (High Speed) position.
2. Check to see that the speed control lever on the
engine side is touching the low speed limiting bolt(low
idle) when the governor handle is put in
L (Low Speed)
position.
3. If the speed control lever does not touch the limiting
bolt for either the high or low speed when you check
them, loosen the setting screws on the fittings for the
accelerator cable and adjust the position of the cable.
NOTICE:
Never remove the limiting bolt for the fuel injec-
tion pump or the restraint bolt on the amount of
fuel injected. Doing so will impair safe opera-
tion and lower the efficiency of the engine and
shorten its life.
(5B) Adjusting the Clutch Remote Control
Handle for the Marine Gear
1. Check to see that the clutch lever on the marine gear
side is in the neutral position when the remote control
handle is in NEUTRAL.
2. If the position of the clutch lever is incorrect, loosen
the setting screw of the cable fitting and adjust the
position of the cable.
3. Check the clutch lever in
∆
FWD(Forward)
∇
REV(Reverse)
making sure it is correctly aligned.
4. Make any necessary adjustments using NEUTRAL as
the base position.
Low speed High speed
Pull out handle lever
Pull out free throttle button
HIG
H S
PE
ED
speed lever
LOW SPEED NEUTRAL
HIGH SPEED
LOW
SPEED
NEUTRAL
HIGH SPEED
LOW
SPEED
LOW
SPEED
HIGH
SPEED
REV
FWD
NEUTRAL
HIG
H
SP
EE
D
LOW
SPEED
LOW
SPEED
HIGH
SPEED
REV
FWD
NEUTRAL
Cable fitting
Cable fitting
FORWARD
FORWARD
REVERSE
REVERSE
NEUTRAL
NEUTRAL
Clutch
lever
Clutch lever
KBW21
KMH4A
KMH4A