Yanmar 4JH3-TE, Руководство по эксплуатации

Страница: 28 / 65

24 4. HOW TO OPERATE
4. HOW TO OPERATE
Alcohol
• Never operate the engine while you are under the influence of alcohol or
when you are ill or feel unwell as this results in accidents.
Exhaust Gas Poisoning
• Be sure to establish good ventilation in the engine room with windows,
vents, or other ventilation equipment. Check again during operation to be
sure that ventilation is good. Exhaust gas contains poisonous carbon mon-
oxide and should not be inhaled.
Moving Parts
• Do not touch the moving parts of the engine (propeller shaft, V-belt, PTO-
pulley, etc.) during operation or let your clothing get caught in them as this
can result in injury.
• Never operate the engine without the covers on the moving parts.
• Check before starting the engine to see that any tools or cloths used in
maintenance have been removed from the area.
Bums from Contact with Hot Engine Parts
• The whole engine is hot during operation and immediately after stopping.
The turbocharger, exhaust manifold, exhaust pipe, and engine are very hot.
Never touch these parts with your body or clothing.
4.1 Inspection Before Starting
Be sure to check the following items daily before starting the engine.
(1) Visual Check
Check for the following:
If any problem is found, do not use the engine until repairs have been completed.
• Oil leakage from the lube oil system
• water leakage from the cooling water system
• Damage to parts
• Fuel oil leakage from the fuel system
• Loosening or loss of bolts
(2) Checking and Resupplying Fuel Oil
Check the fuel level inside the fuel tank and supply with the recommended fuel if necessary.
→
See 3.2
(3) Checking and Resupplying Engine Lube Oil
1. Check the engine oil level with the oil dipstick.
2. If the oil level is low, supply with the recommended lube oil using the filler port.
Supply oil up to the upper mark on the oil dipstick.
→
See 3.3