YANGTECH EMP Series, Руководство по эксплуатации

Страница: 15 / 23

A05G069A
15
Caution: Unused contacts must avoid short circuits, which may cause inner components to burn
out
Note1
：
1. Voltage pulse(from 0Vto next 0V as a full cycle, max. pulse=9000 Pulses/min, pulse
width(in mini-second “mSec”) must comply with following table list.
2. Voltage<0.8V=Low Level; Voltage=3.0V~60V=High Level
Signal Item Symbol Min. Type Max. Unit
Timing
Characteristic
Low time TA 3.33 ∞ mSec
HI time TB 3.33 ∞ mSec
1 Cycle TC 6.66 ∞ mSec
Note2
：
An external switches circuit diagram
Run/Stop Full Speed (switch)
Note3
：
Pulse/Batch/Low level signal connection diagram
：
(Max. power is 20W, overload, short circuit, over voltage or current leads to break
inner devices)
Pin B4
Pin B6
Pin B7
DC_com.
Pin B9,11,13
Pin B8,10,12
Indicator
(Lamp)
MOS switch
DC+ power