Yamato SM200 Скачать руководство пользователя страница 6

Страница: 6 / 47

Safety Information

Safety Precautions

Do not use this unit for any purpose other than its intended use, described in this manual.

This unit is not explosion proof. Never use in flammable or explosive gas environments.

Be sure to ground the unit. Electric leak could cause electrical shock or fire.

Be sure to use a power supply with more than the rated capacity specified in this manual. Use

of a power supply without the correct rated voltage and current could cause fire or electric

shock.

If smoke or any strange odor should disburse from this unit, turn the breaker off immediately

and pull out the main power cord. Then contact Yamato Scientific. Neglecting this procedure

can result in fire or electric shock. Never try repairing the unit yourself.

Forcibly bending, pulling, wrenching or extending the power cord can cause a fire or electric

shock.

Overheat or fire can occur if the power cord is bundled or if an object is on the cord.

The use of explosive, flammable or such compounds can cause explosion or fire. (See Pg.7)

Disassembling this unit can cause fire, electric shock or other crisis’s.

The exhaust is located on the right side of the unit. Possibility of personal injury if you come in

contact with this area during operation or for a period of time after use.

Содержание SM200
















































Результаты поиска

Содержание SM200

Отзывы:

Похожие инструкции для SM200

Бренды по названию

Популярные бренды

Yamato SM200, Руководство пользователя

Результаты поиска

Содержание SM200

Отзывы:

Похожие инструкции для SM200

Бренды по названию

Популярные бренды