25
Program “MODE”
Setting Sterilization Temperature and Time
Setting sterilization temp/time
◆
Used to set the sterilization temp/time.
◆
Simply push the ”MODE” key to cancel the set up at any point.
◆
The sterilizer automatically sets in stand-by mode if it is untouched for more than a minute during
set up.
Stand-
by
Turn the breaker on.
The main display blinks sterilization temperature, and the sub
display blinks sterilization time.
Push the “MODE” key.
The main display blinks
, and the sub display flashes
sterilization temperature.
Push the “ENTER” key. At this time, you can change the
sterilization temperature.
Input the sterilization temperature desired by pushing the
▽△
keys.
▽
key
…
To lower temperature.
△
key
…
To raise temperature.
S.
Temp.
Push the “ENTER” key.
The changed sterilization temperature is fixed, and the panel
shows the next function, sterilization time set-up.
Push the “ENTER” key again.
You can now change the sterilization time.
Input sterilization time you desire by
▽△
key.
▽
key
…
To reduce time.
△
key
…
To increase time.
S.
Time
Push the “ENTER” key.
The changed sterilization time is fixed, and the panel blinks the
next function, dry temperature set-up.
D.
Temp.
Push the “MODE” if the dry mode will not be in use. If the dry
mode will be in use, press the “ENTER” key and continue to the
next page.
Содержание SM200
Страница 26: ...24 Program MODE Flowchart ...
Страница 40: ...38 Wiring Diagram SM200 X SM300 Inside of dashed line is option ...