Yamato DNF 400, Инструкция по эксплуатации

Страница: 16 / 76

12
Description and Function of Each Part
Control Panel
AUTO START
FIXED TEMP
AUTO STOP
1
2
3 21
9
10
11
12
13 14 15 16 17 18 19
20
5
6
7
8
℃
PROGRAM
STANDBY
END
HEATER
FAN
FUNCTION PROGRAM MENU ENTER CANCEL
SUBMENU
POWER
TROUBLE
DOOR
4
1 Main Display
：
Displays the measured temperature and error code.
2 Sub Display
：
Displays the operation and setting information.
3 DOOR lamp
：
Lights while the door is opened. (Disabled in this unit.)
4 TROUBLE Lamp
：
Blinks when a trouble occurs.
5 FIXED TEMP lamp
：
Lights while the fixed temperature operation is running.
Blinks while the choosing operation mode.
6 AUTO STOP Lamp
：
Lights while the auto stop operation is running.
Blinks while choosing the operation mode.
7 AUTO START Lamp
：
Lights while the auto start operation is running.
Blinks while choosing the operation mode.
8 PROGRAM Lamp
：
Lights while the program operation is running.
Blinks while choosing the operation mode.
9 STANDBY Lamp
：
Lights while the device is in standby state.
Blinks while the device is in startup wait state.
10 END Lamp
：
Blinks at end of the autostop or program operation.
11 HEATER Lamp
：
Lights while the heater works.
12 FAN Lamp
：
Lights while the fan works.
13 FUNCTION Key
：
Starts the function menu.
14 PROGRAM Key
：
Starts the program menu.
15 MENU Key
：
Starts the operation menu.
16
▼ (Down) Key ：
Lowers down the setting value.
17
▲
(Up) Key
：
Rises up the setting value.
18 ENTER Key
：
Settles the inputted value/item.
19 CANCEL Key
：
Cancels the current inputting.
20 POWER Key
：
Turns ON/OFF the power.
21 SUBMENU Key
：
Used for operation with the optional accessory.