3-3
Chapter 3. INSTALLATION AND WIRING
3 - 2 Installation
■
Panel cut-out dimensions
The figure below shows the dimensions of the panel cut-out required.
The panel thickness should be 1.6 to 5 mm.
■
Installation
Insert the body in the cut-out panel.
Use the provided four mounting bracket screws to secure the top and bottom of the
EST
to the panel.
When the heads of the screws of the four mounting bracket are flush with the
panel and there is no looseness, turn the screws an extra half to one full turn to
ensure that the
EST
is firmly secured.
Handling Precautions
Over tightening the screws of the four mounting bracket can deform or
damage the case.
!"#
$ % & '"
( )
