4-14
Messages in the message area (upper side)
Messages in the message area 2
Unless the new conf is saved with CONF WRITE, it will be lost at power
down.
Touch
[Exit]
to go back to the system menu.
Handling Precautions
Be sure to save the setting changes with “Conf. Write”. Unwritten changes
will be lost at reboot.
(Except LCD contrast)
■
Communications conf.
This menu is to change or check the
EST
communication settings.
Touch
[3. Communications conf.]
in the system menu.
>>
The following screen will be displayed.
Each time when you touch the switch marked
, the indication changes.
For example, when you touch the parity switch, the indication changes
“E”
→
“O”
→
“N”, and back to Even.
Messages displayed in the message area:
Unless the new conf is saved with CONF WRITE, it will be lost at power
down.
Handling Precautions
• The settings made in this menu become effective at the operation start.
• Be sure to save the setting changes by [Conf. Write]. Unwritten changes
will be lost at reboot and the settings return to the factory set value.
Chapter 4. CONNECTIONS AND SETUP
Selected item
Message
Auto Run Mode
Use the Up/Down keys to set the RUN mode delay after
power up.
Backlight off
Use the Up/Down keys to set the automatic backlight
shutdown delay.
Screen saver
Use the Up/Down keys to set the screen saver start delay.
Buzzer tone
Use the Up/Down keys to select the buzzer tone.
LCD contrast
Use the Up/Down keys to adjust LCD contrast.
