YAMARIN Cross 53 Bow Rider, Руководство пользователя

Страница: 26 / 40

Yamarin Cross 53 Bow Rider
26 (40)
5.10.4 Anchoring and mooring the boat
Always moor your boat carefully, even in sheltered places, because conditions can change
rapidly. Mooring lines should be equipped with absorbers to dampen any jolts. Please refer
to the section on towing for the location of bollards. To prevent abrasion, use fenders that
are large enough.
The hook located at the bow of the boat is for locking the boat to trailer. The hook on the
deck is for locking the boat (e.g. to a pier). The locations of the hooks are presented on page
36.
NOTE! Make sure that the lock or chain does not scratch the deck of the
boat.
The endurance of the bow bollards forward and the aft bollards backward is at least 12.6 kN,
which is approximately 1,300 kg. The endurance of the ropes should be less than 1300kg in
order for the rope to break before the bollards break.
The minimum anchor weight for the boat is 5 kg. Drop anchor far enough from shore. A
moderate grip is attained if the anchor line length is 4-5 times the water depth.
WARNING! Do not try to stop the boat with your hands, and do not put your
arm or foot between the boat and the pier, shore or another
vessel!
NOTE! When securing your boat, you must take into consideration
possible changes in wind direction, a rise or lowering of the water
level, any possible bow wakes etc. You can get more information
from e.g. your insurance company.
NOTE! It is the owner's / user's responsibility to make sure that the
boat's mooring and anchoring equipment is suitable for the boat's
intended use.
5.10.5 Towing
When towing another boat, use a floating line that is strong enough for the task. Begin
towing carefully, avoid jerks, and do not overload the engine.
The owner of the boat should consider the measures necessary for securing the boat’s
towrope.