YAMARIN Cross 53 Bow Rider, Руководство пользователя

Страница: 15 / 40

Yamarin Cross 53 Bow Rider
15 (40)
WARNING! Never exceed the maximum recommended load when loading
the craft
. Always load the craft carefully and distribute loads
appropriately so that the boat is on an even keel. Heavy
equipment should usually be placed in the storage compartment
under the aft seat. Always avoid placing heavy items high up.
5.5 Engine and propeller
The maximum recommended engine power for the Yamarin Cross 53 BR is 70 hp (52 kW)
.
The construction of the boat is not designed to bear more power than 70 hp. Manoeuvering
the boat can be very dangerous if the boat has an engine bigger than 70 hp. The warranty is
not valid if the boat is used with more power than 70 hp. Follow the dealer’s instructions
when choosing the propeller for your craft.
5.6 Prevention of water incursion and stability
5.6.1 Hull and deck thru fittings and closing valves
The Yamarin Cross 53 BR has a rainwater draining system, which means that rainwater is
drained from the undecked part of the boat when the boat is on the water. The system also
functions when the boat is out of water, provided that the bow is higher than the stern and
closing valve is open.
The rainwater drainage closing valve is located under the middle hatch of the aft seat. This
drain valve is meant to be shut only when at maximum load to prevent potential water
incursion.
In other loading conditions the drain valve should remain open to let rainwater
drain from the boat .
The boat has a hand-operated bilge pump shown in the picture below. The hand-operated
bilge pump has a capacity of about
0,5
l/pull.