background image

8-3

8

tomobiles, to promote safe driving behaviors,
you should supervise younger drivers and
consider setting rules and putting limits on
how, when, and where the YXZ10YEXR /
YXZ10YEZR can be used.

Passenger requirements

This vehicle is designed for the operator and
one passenger. Allowing passengers to ride
improperly can lead to serious injury or death.
As the operator, you are responsible for your
passenger.

Your passenger must be able to place both
feet on the floorboard while seated upright
with his/her back against the backrest.

Your passenger must be able to reach and
hold the passenger handhold.

Allow only one passenger in the vehicle and
only in the designated passenger seat. Do
not carry any other passengers. Do not car-
ry passengers in the cargo bed.

Do not allow someone to ride as a passen-
ger who has been using drugs or alcohol.

Do not allow children who need child safety
seats or booster seats in the YXZ10YEXR /
YXZ10YEZR. The seat belt is not designed
to restrain automotive child safety seats.

UBDW11E0.book  Page 3  Wednesday, June 7, 2023  11:11 AM

Содержание YXZ10YEXR































































































































































































































Отзывы: