9-70
9
If a fuse is blown, replace it as follows.
1. Turn the key to “
” (off) and turn off the
electrical circuit in question.
NOTICE
ECB00641
To prevent accidental short-circuiting,
turn off the main switch when checking or
replacing a fuse.
2. Remove panel A. (See page 9-13.)
3. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the
specified amperage. Never use any
material in place of the proper fuse.
Using an improper fuse can cause
damage to the electrical system and
may lead to a fire.
[EWB03440]
1. Headlight fuse “HEAD”
2. Signaling system fuse “SIGNAL”
3. Four-wheel-drive motor fuse “DIFF”
4. Ignition fuse “IGNITION”
5. Backup fuse “BACK UP” (for clock)
6. Radiator fan motor fuse “FAN”
7. Spare fuse
8. Auxiliary DC jack fuse “TERMINAL”
9. Accessory fuse “ACC”
10.YCC-S motor control fuse 1 “MOTOR_CONT_1”
11.YCC-S motor control fuse 2 “MOTOR_CONT_2”
12.Sub radiator fan motor fuse “FAN_2”
13.Accessory fuse 2 “ACC2_1”
14.Accessory fuse 3 “ACC2_2”
1
7
13
12
10
8
2 3 4 5 6
7
14
11
9
UBDW11E0.book Page 70 Wednesday, June 7, 2023 11:11 AM
