YVC-1000MS User's Manual
17
■
Before connecting, check the following.
Prepare the USB cable supplied with the product.
The following system environment is required in the Mac to be connected to the product.
•
OS: macOS (*1)
•
USB: USB 2.0 or later
(*1) For the supported versions, refer to the following website:
https://uc.yamaha.com/
•
It is not possible to connect and use more than one microphone or speaker including the product to one Mac at the
same time.
•
Do not use a cable other than the USB cable supplied with the product. If a different USB cable is used, it may
cause operational problems.
•
The product must be connected directly to a Mac. If the product is connected to a Mac via a USB hub, it may cause
operational problems.
•
In rare cases, an audio playback may be interrupted due to Mac conditions such as the workload or the free space in
memory.
■
Connection
Connect the product to a Mac using the supplied USB cable.
Before connecting them, set the product to the standby mode.
You do not need to install the USB driver separately because the product is recognized as a basic USB audio device by the
Mac.
Connecting to a Mac using the USB cable
Notes
To USB
port
Plug into an
outlet
Connect to the
microphone
