YVC-1000MS User's Manual
29
■
When automatic audio tuning has ended abnormally (problem detection)
When automatic audio tuning has ended abnormally (problem detection), the call button (
) flashes orange at high
speed. Check the detected problems using the voice guidance, and take the appropriate action, referring to "Warning
guidance list" (page 45).
1
Press the call button (
) while it is
flashing orange at high speed.
The voice guidance notifies the user about the
detected problem three times at 5-second intervals.
2
The voice guidance notifies the user
about the next problem one minute
after the playback of the first problem
has been completed.
After the playback of all the problems is completed,
the call button (
) lights up green, and the product
returns to the normal mode.
•
If the call button (
) is not pressed for 5 minutes while
it is flashing orange at high speed, the call button (
)
lights up green, and the product
returns to the normal
mode
.
•
If the call button (
) is pressed during guidance
playback, the product works as shown below depending
on guidance conditions.
-
When a problem is replayed: The playback is stopped,
and the product enters the standby mode (1 minute) to
replay the next problem.
-
When a problem is not replayed: The playback of the
next problem starts immediately.
Call button:
High-speed flash (Orange)
