YVC-1000MS User's Manual
14
■
Checking whether the connection is made normally
After the connection has been completed, execute the following steps to check that the product is normally recognized
by the PC.
The items and other options shown in the setting window vary depending on your PC environment.
1
Press the power button (
) to turn
the product on.
When the power is turned on, all the buttons light up
green.
2
Display the control panel.
•
In Windows 7, click "Start" - "Control Panel".
•
In Windows 8.1/10, right-click at the lower-left
end of the Start screen, then click "Control Panel".
3
Click "Hardware and Sound" -
"Sound".
The "Sound" window appears.
4
Click the "Playback" tab.
5
Check that "Yamaha YVC-1000MS"
is set to the default device.
If it is not set to the default device, click "Yamaha
YVC-1000MS", and click "Set Default".
Normally, when a connection is made, "Yamaha YVC-
1000MS" is automatically set to the default device.
6
Click the "Recording" tab.
Note
Click
Check
Click
