45
MANUAL SETUP
ADV
ANC
E
D
OP
E
R
A
T
IO
N
En
glis
h
3
Press
/
to select the character you
want.
• You can use up to 8 characters for each input.
• Press
to change the character in the following
order, or press
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
4
Repeat steps 1 and 2 to rename each input.
5
To exit, press SELECT when finished.
The new name(s) are registered, and the display
returns to the previous screen.
You can use this menu to adjust the optional system
parameter, such as OSD settings and the display unit of
measurement.
(SET MENU
→
MANUAL SETUP
→
OPTION MENU)
■
DISPLAY SET (Display settings)
Use to adjust the brightness of the front panel display.
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display
when this unit is operated via the front panel or remote
control.
Choices: –2, –1,
OFF
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the
front panel display dims. Use to adjust the brightness of
the front panel display in this case.
Choices: DISPLAY OFF, –3 to –1 (based on the
STANDARD DIMMER setting),
OFF
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust in
the – (minus) direction to raise the position of the OSD,
and adjust in the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
Choices:
BLUE
, GRAY
SELECT
OPTION MENU
.
A)DISPLAY SET
B)UNIT SET
[]/[]:Up/Down
[SELECT]:Enter
4 OPTION MENU
p
p
.
STANDARD DIMMER
;;;;;;;;;;
OFF
AUTO DIMMER
;;;;;;;;;;
OFF
[]/[]:Up/Down
[<]/[>]:Select
A)DISPLAY
SET 1/2
p
p