Yamaha XV19SX(C) Скачать руководство пользователя страница 274

Страница: 274 / 494

CAMSHAFTS

5-25

2. Remove:

• Camshaft driven gear
• Straight key

NOTE:

Cover the crankcase hole with a clean rag to
prevent the straight key from falling into the
crankcase.

3. Loosen:

• Front cylinder camshaft gear bolt “1”

NOTE:

• Place a folded copper washer “2” between the

teeth of the front cylinder camshaft gear and
rear cylinder camshaft gear in order to lock
them.

• Do not damage the teeth of the front cylinder

camshaft and rear cylinder camshaft gears.

4. Remove:

• Rear cylinder camshaft gear
• Front cylinder camshaft gear
• Straight key

NOTE:

Cover the crankcase hole with a clean rag to
prevent the straight key from falling into the
crankcase.

5. Loosen:

• Camshaft drive gear bolt “1”
• Right balancer driven gear bolt “2”

NOTE:

• Place a folded copper washer “3” between the

teeth of the right balancer drive gear and right
balancer driven gear in order to lock them.

• Place a folded copper washer “4” between the

teeth of the right balancer drive gear and right
balancer driven gear in order to lock them.

• Do not damage the teeth of the right balancer

drive and right balancer driven gears.

6. Remove:

• Right balancer driven gear
• Camshaft drive gear
• Right balancer drive gear
• Straight keys

NOTE:

Cover the crankcase hole with a clean rag to
prevent the straight keys from falling into the
crankcase.

7. Remove:

• Oil delivery pipe 1 “1”
• Camshaft cover “2”

NOTE:

Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.

Содержание XV19SX(C)















































































































































































































































































































































































































































































































Результаты поиска

Содержание XV19SX(C)

Отзывы:

Похожие инструкции для XV19SX(C)

Бренды по названию

Популярные бренды

Yamaha XV19SX(C), Руководство по обслуживанию

Результаты поиска

Содержание XV19SX(C)

Отзывы:

Похожие инструкции для XV19SX(C)

Бренды по названию

Популярные бренды