manualshive.com logo in svg

Yamaha XV19SX(C), Руководство по обслуживанию, Страница: 241 / 494

Поделиться
Скачать
Yamaha XV19SX(C) Скачать руководство пользователя страница 241

REAR SHOCK ABSORBER ASSEMBLY AND SWINGARM

4-88

2. Install:

• Bearings “1”, “2”, “3”

(to the relay arm)

• Oil seals “4”, “5”

(to the relay arm)

3. Lubricate:

• Bushings
• Oil seals
• O-rings
• Collar

NOTE:

Apply grease only to the collar between the con-
necting arms and rear shock absorber.

4. Install:

• Bushings “1”

(to connecting arms)

• Spacer “2”

CAUTION:

EC1D71010

When inserting the spacer into the connect-
ing arms and the rear shock absorber, be 
careful not to damage the bushings and O-
rings.

NOTE:

Install the bushings so that the slits “b” in the 
bushings are within the areas shown in the illus-
tration.

5. Install:

• Connecting arms
• Rear shock absorber assembly

(to relay arm)

• Relay arm

(to the swingarm)

NOTE:

Be sure to face the “FWD” mark “a” on the relay 
arm “1” toward the front of the vehicle and to 
face the label “b” on the rear shock absorber “2” 
downward.

 

Installed depth “a”

4.5 mm (0.18 in)

Installed depth “b”

1.0 mm (0.04 in)

Installed depth “c”

6.0 mm (0.24 in)

Installed depth “d”

2.5 mm (0.10 in)

A. Right side
B. Left side

 

Recommended lubricant

Lithium-soap-based grease

c

d

d

c

b

b

a

1

5

4

3

3

2

4

5

4

A

B

4

b

b

a

a

 

Installed depth “a”

4.5 mm (0.18 in)

3. Connecting arm
4. Rear shock absorber
A. Right side
B. Left side
C. 90°

2

a

a

a

a

A

B

3

3

1

1

4

1

3

b

C

C

Содержание XV19SX(C)















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов