Yamaha XP500 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 104

Yamaha XP500 Скачать руководство пользователя страница 88

7-3

SCOOTER CARE AND STORAGE

7

After cleaning

1. Dry the scooter with a chamois

or an absorbing cloth.

2. Use a chrome polish to shine

chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally
induced discoloring of stainless-
steel exhaust systems can be
removed through polishing.)

3. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal, includ-
ing chrome- and nickel-plated,
surfaces.

4. Use spray oil as a universal

cleaner to remove any remaining
dirt.

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted surfaces.
7. Let the scooter dry completely

before storing or covering it.

EWA00002

w

8

8

Make sure that there is no oil
or wax on the brakes or tires.
If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires
with warm water and a mild
detergent.

8

8

Before operating the scooter
test its braking performance
and cornering behavior.

ECA00013

c

C

8

8

Apply spray oil and wax spar-
ingly and make sure to wipe
off any excess.

8

8

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

8

8

Avoid using abrasive polish-
ing compounds as they will
wear away the paint.

NOTE:

Consult a Yamaha dealer for advice
on what products to use.

5GJ-28199-E2 9/9/02 9:15 AM Page 86

«
...
86
87
88
89
90
...
»

Содержание XP500









































































































Отзывы:

Нет отзывов