manualshive.com logo in svg

Yamaha XP500, Руководство пользователя, Страница: 28 / 104

Поделиться
Скачать
Yamaha XP500 Скачать руководство пользователя страница 28

3-11

EAU04284

ECA00104

c

C

Use only unleaded gasoline. The
use of leaded gasoline will cause
severe damage to internal engine
parts, such as the valves and pis-
ton rings, as well as to the exhaust
system.

INSTRUMENT AND CONTROL FUNCTIONS

3

Your Yamaha engine has been
designed to use regular unleaded
gasoline with a research octane num-
ber of 91 or higher. If knocking (or
pinging) occurs, use a gasoline of a
different brand or premium unleaded
fuel. Use of unleaded fuel will extend
spark plug life and reduce mainte-
nance costs.

EAU03802

Seat

Seat

To open the seat

1. Place the scooter on the center-

stand.

2. Insert the key into the main

switch, and then turn it counter-
clockwise.

NOTE:

Do not push inward when turning the
key.

3. Fold the seat up.

IGNI

TI

O

N

P

LOCK

ON

OFF

OPEN

PUSH

PUSH

a

a.

Open.

Recommended fuel:

REGULAR UNLEADED 
GASOLINE ONLY

Fuel tank capacity:

Total amount:

14 L

5GJ-28199-E2  9/9/02 9:15 AM  Page 26

Содержание XP500









































































































Отзывы:

Нет отзывов