Yamaha XP500, Руководство пользователя, Страница: 24 / 104

3-7
EAU03889
Turn signal switch “
4
/
6
”
Turn signal switch
To signal a right-hand turn, push this
switch to “
6
”. To signal a left-hand
turn, push this switch to “
4
”. When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
EAU00129
Horn switch “
*
”
Horn switch
Press this switch to sound the horn.
INSTRUMENT AND CONTROL FUNCTIONS
3
1
2
3
4
1. Pass switch “PASS”
2. Dimmer switch “
&
/
%
”
3. Turn signal switch “
4
/
6
”
4. Horn switch “
*
”
EAU03890
Engine stop switch “
#
/
$
”
Engine stop switch
Set this switch to “
#
” before starting
the engine. Set this switch to “
$
” to
stop the engine in case of an emer-
gency, such as when the scooter
overturns or when the throttle cable is
stuck.
1
2
3
1. Engine stop switch “
#
/
$
”
2. Hazard switch “
0
”
3. Start switch “
,
”
EAU03826
Hazard switch “
0
”
Hazard switch
With the key in the “ON” or “
.
” posi-
tion, use this switch to turn on the
hazard light (simultaneous flashing of
all turn signal lights).
The hazard light is used in case of an
emergency or to warn other drivers
when your scooter is stopped where
it might be a traffic hazard.
EC000006
c C
Do not use the hazard light for an
extended length of time, otherwise
the battery may discharge.
EAU03801
Start switch “
,
”
Start switch
With the sidestand up, push this
switch while applying the front or rear
brake to crank the engine with the
starter.
EC000005
c C
See page 5-1 for starting instruc-
tions prior to starting the engine.
5GJ-28199-E2 9/9/02 9:15 AM Page 22