manualshive.com logo in svg

Yamaha XP500, Руководство пользователя, Страница: 75 / 104

Поделиться
Скачать
Yamaha XP500 Скачать руководство пользователя страница 75

6-30

PERIODIC MAINTENANCE AND MINOR REPAIR

6

To check the operation

1. Place the scooter on a level sur-

face and hold it in an upright
position.

2. While applying the front brake,

push down hard on the handle-
bars several times to check if the
front fork compresses and
rebounds smoothly.

EC000098

c

C

If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or
repair it.

EAU02939

Checking the front fork

Front fork, checking

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the peri-
odic maintenance and lubrication
chart.

To check the condition

EW000115

w

Securely support the scooter so
that there is no danger of it falling
over.

Check the inner tubes for scratches,
damage and excessive oil leakage.

Recommended lubricant:

Lithium-soap-based grease 
(all-purpose grease)

5GJ-28199-E2  9/9/02 9:15 AM  Page 73

Содержание XP500









































































































Отзывы:

Нет отзывов