manualshive.com logo in svg

Yamaha XP500, Руководство пользователя, Страница: 27 / 104

Поделиться
Скачать
Yamaha XP500 Скачать руководство пользователя страница 27

3-10

INSTRUMENT AND CONTROL FUNCTIONS

3

To install the fuel tank cap

1. Align the match marks, insert the

fuel tank cap into the tank open-
ing, and then push down on the
cap.

2. Turn the key counterclockwise to

the original position, and then
remove it.

3. Close the lid.

EWA00047

w

Make sure that the fuel tank cap is
properly installed and locked in
place before riding the scooter.

1

1.

Match marks

EAU00185

c

C

Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted sur-
faces or plastic parts.

EAU03753

Fuel

Fuel

Make sure that there is sufficient fuel
in the tank. Fill the fuel tank to the
bottom of the filler tube as shown.

EW000130

w

8

8

Do not overfill the fuel tank,
otherwise it may overflow
when the fuel warms up and
expands.

8

8

Avoid spilling fuel on the hot
engine.

2

1

1.

Fuel tank filler tube

2.

Fuel level

5GJ-28199-E2  9/9/02 9:15 AM  Page 25

Содержание XP500









































































































Отзывы:

Нет отзывов