8 - 58
–
+
ELEC
IMMOBILIZER SYSTEM
3. Insert the standard key to be registered into the main switch, and then turn the main switch to
“ON” within 5 seconds to activate the key registration mode.
NOTE:
All existing standard key codes will be erased from the memory when the key registration mode is
activated. When the key registration mode is activated, the immobilizer system indicator light
flashes rapidly (i.e., off for 0.5 second and on for 0.5 second).
4. While the indicator light is flashing, turn the main switch to “OFF”, remove the key, and then insert
the second standard key to be registered into the main switch within 5 seconds.
NOTE:
If the immobilizer system indicator light stops flashing 5 seconds after the first standard key is regis-
tered, the registration mode is deactivated. If this occurs, the second standard key cannot be regis-
tered, therefore, repeat steps 2 to 4 to register both standard keys.
5. Turn the main switch to “ON”.
NOTE:
When the indicator light goes off, registration is complete.
6. Check that the engine can be started with the two registered standard keys.
Voiding a standard key code:
If a registered standard key has been lost and you want to disable its use, register a new standard
key or re-register the other standard key. For registration of a standard key, refer to “Standard key
registration:”.
Standard key registration erases the stored standard key codes from memory, therefore, the lost
standard key is disabled.
Standard key
registration
less than 5.0 s
less than 5.0 s
less than 5.0 s
less than 5.0 s
Registration of the
second standard key
is complete.
Second standard key
Code re-regis-
tering key
First standard
key
Registration mode
Immobilizer system indicator light stops flash-
ing when the registration of the second stan-
dard key is complete.
Main
switch
LED
OFF
ON
On
Off
0.5 s
0.5 s
Standard key
code voiding
method
If the immobilizer system indicator light
stops flashing 5 seconds after the first
standard key is registered, the second
standard key cannot be registered.
less than 5.0 s
less than 5.0 s
less than 5.0 s
Code re-register-
ing key
Remaining
standard key
Registration mode
Main
switch
LED
OFF
ON
On
Off
5.0 s
0.5 s
0.5 s
Содержание XP500
