Yamaha XP500, Руководство по обслуживанию

Страница: 43 / 559

2 - 3
SPEC
ENGINE SPECIFICATIONS
Oil filter
Oil filter type Cartridge (paper) ----
Bypass valve opening pressure 80 ~ 120 kPa
(0.8 ~ 1.2 kg/cm
2
, 11.6 ~ 17.4 psi)
----
Oil pump
Oil pump type Trochoid ----
Inner-rotor-to-outer-rotor-tip clear-
ance 0.04 ~ 0.12 mm (0.0016 ~ 0.0047 in) 0.20 mm
(0.0079 in)
Outer-rotor-to-oil-pump-housing
clearance 0.045 ~ 0.085 mm (0.0018 ~ 0.0033 in) 0.15 mm
(0.0059 in)
Oil-pump-housing-to-inner-and-
outer-rotor clearance 0.11 ~ 0.23 mm (0.0043 ~ 0.0091 in) 0.30 mm
(0.0118 in)
Pressure check location MAIN GALLERY ----
Cooling system
Radiator capacity (including all
routes) 1.5 L (1.32 Imp qt, 1.59 US qt) ----
Coolant reservoir capacity (up to the
maximum level mark) 0.35 L (0.31 Imp qt, 0.37 US qt) ----
Radiator cap opening pressure 107.9 ~ 137.3 kPa
(1.08 ~ 1.37 kg/cm
2
, 15.6 ~ 19.9 psi)
----
Radiator core
Width 330 mm (12.99 in) ----
Height 138 mm (5.43 in) ----
Depth 24 mm (0.94 in) ----
Thermostat
Model/manufacturer 4JH/NIPPON THERMOSTAT ----
Valve opening temperature 69 ~ 73 °C (156.2 ~ 163.4 °F) ----
Valve full open temperature 85 °C (185 °F) ----
Valve lift-full open 8.0 mm (0.31 in) ----
Water pump
Water pump type Single-suction centrifugal pump ----
Reduction ratio 23/19 (1.210) ----
Starting system type Electric starter ----
Spark plugs
Model/manufacturer
×
quantity CR7E/NGK
×
2 ----
Spark plug gap 0.7 ~ 0.8 mm (0.028 ~ 0.031 in) ----
Cylinder head
Volume 14.97 ~ 15.57 cm
3
(0.91 ~ 0.95 cu.in) ----
Max warpage ---- 0.03 mm
(0.0012 in)
Item Standard Limit