Yamaha XLT1200 WaveRunner 2003, Инструкция по сборке

Страница: 50 / 60

– 18 –
E
STEERING CABLE
1. Check:
●
Jet thrust nozzle clearance
a
,
b
Difference
→
Adjust.
Checking steps:
●
Set the control grip in the neutral posi-
tion.
●
Turn the handlebar lock to lock.
●
Measure the clearances
a
and
b
.
●
If
a
and
b
clearances are not even,
adjust the cable joint.
2. Adjust:
●
Steering cable joint (handle end)
Adjustment steps:
●
Set the control grip in the neutral posi-
tion.
●
Loosen the locknut 1 .
●
Disconnect the cable joint 2 from the
ball joint 3 .
●
Turn the cable joint 2 in or out for
adjusting clearances
a
and
b
.
Turn in Clearance
a
is increased.
Turn out Clearance
b
is increased.
WARNING
The cable joint must be screwed in more
than 8 mm (0.31 in).
●
Connect the cable joint and tighten the
locknut.
T
R
.
.
Locknut:
6 N • m (0.6 kgf • m, 4.3 ft • lb)