Yamaha WaveRunner SuperJet 2015 Скачать руководство пользователя | Manualshive

Страница: 36 / 78

background image

Operation and handling requirements

30

EJU40022

Draining the bilge water

NOTICE

ECJ01302

Do not run the engine at full throttle when
bilge water remains in the engine com-
partment. The bilge water can splash into
the engine, which can result in severe
damage.

EJU40922

Draining the bilge water on water

A small quantity of bilge water will remain in
the engine compartment even after the bilge
water is drained on water. To completely re-
move the bilge water, remove the watercraft
from the water and wipe up any remaining
moisture in the engine compartment with a
dry cloth.

Jet vacuum bilge draining system

While the watercraft is operating, bilge water
in the engine compartment is drawn in by the
vacuum that is generated in the jet pump and
discharged from the watercraft through the
jet thrust nozzle.
To drain the bilge water on water:
Operate the watercraft as straight as possible
and above planing speed for at least 2 min-
utes.

NOTICE:

Do not run the engine at full

throttle for at least 1 minute after the en-
gine has been restarted. Bilge water in the
engine compartment can splash into the

engine, which can result in severe dam-
age.

[ECJ00554]

UF4D70E0.book Page 30 Wednesday, May 7, 2014 10:53 AM

«
...
34
35
36
37
38
...
»

Содержание WaveRunner SuperJet 2015















































































Отзывы:

Нет отзывов

Похожие инструкции для WaveRunner SuperJet 2015

Бренд: Carver Страницы: 11

Бренд: Sevylor Страницы: 64

Musto Performance Skiff

Бренд: Bennett Страницы: 19

Бренд: X-Yachts Страницы: 2

Invitation Triss Racer

Бренд: BOMBARDIER Страницы: 23

Grand Banks 49 Classic

Бренд: Dream Catcher Страницы: 71

Бренд: grabner Страницы: 12

Бренд: Johnson Outdoors Страницы: 12

Бренд: Dehler Страницы: 63

7.4L Bravo Three

Бренд: Mercury Страницы: 134

Бренд: Hansa Sailing Страницы: 37

Бренд: TALAMEX Страницы: 51

Бренд: KAYAKS2FISH Страницы: 20

FX High Output WaveRunner 2007

Бренд: Yamaha Страницы: 116

Бренд: Lake Powell Страницы: 28

Бренд: Lake Powell Страницы: 28

Бренд: Lake Powell Страницы: 28

Бренд: Ranger Tugs Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды