Yamaha WaveRunner SuperJet 2015 Скачать руководство пользователя | Manualshive

Страница: 58 / 78

background image

Care and storage

52

closed space, make sure that it is well
ventilated. Always shield your eyes when
working near batteries.
Keep out of the reach of children.

To remove the battery:
(1) Disconnect the negative (–) battery lead.
(2) Disconnect the positive (+) battery lead.
(3) Disconnect the breather hose.
(4) Unhook the battery bands, and then re-

move the battery from the watercraft.

Checking the battery



Make sure that the battery case is not dam-
aged.



Make sure that the battery terminals are
not corroded or damaged.



Make sure that the breather hose is not
clogged or damaged.

Checking the electrolyte level

Make sure that the electrolyte level is be-
tween the maximum and minimum level
marks.
If the electrolyte level is low, add distilled wa-
ter to raise it to the specified level.

NOTICE:

Use only distilled water for replenishing

the battery, otherwise battery life could be
shortened.

[ECJ00242]

If distilled water was added, check the bat-
tery voltage.
It is recommended to have a Yamaha dealer
check the battery voltage and charge the bat-
tery. If you charge the battery yourself, be
sure to read and follow the instructions pro-
vided with the battery tester and charger you
use.

NOTICE:

Do not attempt to charge a

battery hastily. Battery life could be short-
ened.

[ECJ00252]

Checking the battery bands

Make sure that the battery bands are not
damaged.

To store the battery:
(1) Clean the battery case using fresh water.

1

Positive (+) battery terminal: Red lead

2

Battery band

3

Negative (–) battery terminal: Black lead

4

Breather hose

1

Maximum level mark

2

Minimum level mark

1

Battery band

UF4D70E0.book Page 52 Wednesday, May 7, 2014 10:53 AM

«
...
56
57
58
59
60
...
»

Содержание WaveRunner SuperJet 2015















































































Отзывы:

Нет отзывов

Похожие инструкции для WaveRunner SuperJet 2015

Бренд: Jeanneau Страницы: 80

Бренд: Worx Страницы: 2

Бренд: Malibu Boats Страницы: 78

Бренд: Hunter Страницы: 216

Бренд: Pelican Страницы: 2

Quicksilver 200 Tendy Slatted

Бренд: Mercury Страницы: 63

Бренд: Yamaha Страницы: 515

Бренд: Pakboats Страницы: 8

Бренд: Nautic Страницы: 58

Бренд: Malibukayaks Страницы: 23

Бренд: Barrus Страницы: 52

Бренд: Zodiac Страницы: 210

SUN ODYSSEY 469

Бренд: Jeanneau Страницы: 120

Бренд: Carp Design Страницы: 5

Бренд: CarpMadness Страницы: 21

40 Trawler Single

Бренд: Mainship Страницы: 170

Бренд: J Страницы: 44

Бренд: PURSUIT Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды