4 - 8
INSTRUMENT AND CONTROL FUNCTIONS
4
Tightening torque:
Locknut:
70 Nm (7.0 m.kgf, 51 ft.lbf)
EAU37490
Sidestand
1. Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or lower
it with your foot while holding the ve-
hicle upright.
EWA14190
The vehicle must not be ridden with
the sidestand down, or if the
sidestand cannot be properly moved
up (or does not stay up), otherwise
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
EAU15391
Starting circuit cut-off system
The starting circuit cut-off system (com-
prising the clutch switch and the neutral
switch) prevents starting when the trans-
mission is in gear and the clutch lever
is not pulled.
Periodically check the operation of the
starting circuit cut-off system accord-
ing to the following procedure.
TIP
This check is most reliable if performed
with a warmed-up engine.
Cap_4-15.pmd
3/2/2009, 08:50
8
Содержание TT-R230Y
Страница 9: ...LOCATION OF IMPORTANT LABELS 1 1 2 Cap_1 15 pmd 29 1 2009 10 21 2 ...
Страница 27: ...FORYOUR SAFETY PRE OPERATION CHECKS 5 5 2 Cap_5 15 pmd 2008 06 04 07 59 2 ...
Страница 34: ...7 4 PERIODIC MAINTENANCE AND ADJUSTMENT 7 Cap_7 15 pmd 3 2 2009 09 27 4 ...
Страница 69: ...CONSUMER INFORMATION 10 10 5 Cap_10 15 pmd 29 1 2009 12 18 5 ...
