Yamaha TT-R230Y, Руководство пользователя

Страница: 41 / 74

PERIODIC MAINTENANCE AND ADJUSTMENT
7
7 - 1 1
6. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the
excess oil out.
TIP
The sponge material should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
7. Pull the sponge material over the
air filter element frame.
8. Install the washer and wing nut,
and then insert the air filter element
into the air filter case. NOTICE:
Make sure that the air filter
element is properly seated in the
air filter case. The engine should
never be operated without the air
filter element installed,
otherwise the piston(s) and/or
cylinder(s) may become
excessively worn.
[ECA10481]
9. Install the air filter case cover and
screws.
EAU40421
Cleaning the spark arrester
The spark arrester should be cleaned at
the intervals specified in the periodic
maintenance and lubrication chart.
EWA10980
z z z z z
Always let the exhaust system
cool prior to touching exhaust
components.
z z z z z
Do not start the engine when
cleaning the exhaust system.
TIP
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Remove the tailpipe by removing
the bolts, and then pulling it out of
the muffler.
1. Bolts
2. Tap the tailpipe lightly, and then use
a wire brush to remove any carbon
deposits from the spark arrester
portion of the tailpipe and inside of
the tailpipe housing.
1. Spark arrester
3. Insert the tailpipe into the muffler,
and then install and tighten the bolts
to the specified torque.
Tightening torque:
Tailpipe bolt:
10 Nm (1,0 m.kgf, 2,24 ft.lbf)
TIP
Make sure to align the bolt holes when
inserting the tailpipe.
Cap_7-15.pmd 3/2/2009, 09:27 11