Yamaha TT-R125EY, Руководство по обслуживанию

Страница: 77 / 258

3-25
INSP
ADJ
REAR SHOCK ABSORBER ASSEMBLY INSPECTION / REAR
SHOCK ABSORBER SPRING PRELOAD ADJUSTMENT
REAR SHOCK ABSORBER ASSEMBLY
INSPECTION
1. Inspect:
• Swingarm smooth action
Abnormal noise/unsmooth action
→
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage
→
Replace.
REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
1. Elevate the rear wheel by placing the suitable
stand under the engine.
2. Remove:
• Left side cover
3. Loosen:
• Locknut
1
4. Adjust:
• Spring preload
By turning the adjuster
2
.
Stiffer
→
Increase the spring preload.
(Turn the adjuster 2 in.)
Softer
→
Decrease the spring preload.
(Turn the adjuster 2 out.)
• Be sure to remove all dirt and mud from
around the locknut and adjuster before
adjustment.
• The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjuster.
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
Extent of adjustment
TT-R125E:
155 ~ 175 mm
(6.10 ~ 6.89 in)
TT-R125LE:
147.5 ~ 167.5 mm
(5.81 ~ 6.59 in)
Spring length (installed)
a
:
Standard length
TT-R125E:
165 mm
(6.50 in)
TT-R125LE:
160.5 mm
(6.32 in)
TIP
NOTICE