- 22 -
TF series
Quick Guide
Sampling Frequency
Internal Clock
48 kHz
Signal Delays
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –
∞
dB all faders
Frequency Response
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Total Harmonic Distortion
*2
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600
Ω
, INPUT to OMNI OUT, Input Gain=Min.
Hum & Noise
*3
–128 dBu typ., Equivalent Input Noise, Input Gain=Max.,
–85 dBu, Residual output noise, ST master off
Dynamic Range
110 dB typ., DA Converter,
107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Crosstalk@1 kHz
–100 dB
*1
, adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Dimensions (W x H x D)
and Net Weight
TF5: 866 mm × 225 mm × 599 mm, 20.0 kg
TF3: 716 mm × 225 mm × 599 mm, 17.0 kg
TF1: 510 mm × 225 mm × 599 mm, 13.5 kg
Power Requirements (wattage)
TF5: 120 W; TF3: 110 W; TF1: 100 W
Power Requirements (voltage and hertz)
100–240 V 50/60 Hz
Temperature Range
Operating temperature range: 0–40 °C
Storage temperature range: -20–60 °C
Included Accessories
Quick Guide, Power Cord
*1 Crosstalk is measured with a –30 dB/octave filter@22 kHz.
*2 Total Harmonic Distortion is measured with a –18 dB/octave filter@80 kHz.
*3 Hum & Noise are measured with an A-Weight filter.
* The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual may not apply to
the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately
sold accessories may not be the same in every locale, please check with your Yamaha dealer.
Source code distribution
For three years after the final factory shipment, you may request from Yamaha the source code for any portions of the product which are licensed under the GNU General Public
License/GNU Lesser General Public License/RealNetworks Public Source License by writing to the following address:
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
Pro Audio Department, Yamaha Corporation
The source code will be provided at no charge; however, we may require you to reimburse Yamaha for the cost of delivering the source code to you. The source code can be
downloaded by visiting the following URL:
http://www.yamahaproaudio.com/
•
Note that we shall bear no responsibility whatsoever for any damage arising from changes (additions/deletions) made to the software for this product by a third party other than
Yamaha (or party authorized by Yamaha).
•
Note that re-use of source code released to the public domain by Yamaha is not guaranteed. Yamaha shall not bear any responsibility whatsoever for the source code.
8. Specifications
