- 6 -
TF series
Quick Guide
Precautions
NOTICE
To avoid the possibility of malfunction/damage to
the product, damage to data, or damage to other
property, follow the notices below.
Handling and maintenance
• Do not use the device in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices.
Otherwise, the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day), in order to prevent the
possibility of panel disfiguration, unstable operation, or
damage to the internal components.
• Do not place vinyl, plastic or rubber objects on the device,
since this might discolor the panel.
When cleaning the device, use a dry and soft cloth. Do not
use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic
changes in ambient temperature—when the device is
moved from one location to another, or air conditioning
is turned on or off, for example. Using the device while
condensation is present can cause damage. If there is
reason to believe that condensation might have occurred,
leave the device for several hours without turning on the
power until the condensation has completely dried out.
• Avoid setting all equalizer controls and faders to their
maximum. Depending on the condition of the connected
devices, doing so may cause feedback and may damage
the speakers.
• Do not apply oil, grease, or contact cleaner to the faders.
Doing so may cause problems with electrical contact or
fader motion.
• When turning on the AC power in your audio system, always
turn on the power amplifier LAST, to avoid speaker damage.
When turning the power off, the power amplifier should be
turned off FIRST for the same reason.
• Always turn the power off when the device is not in use.
Saving your data
• This product utilizes an internal backup battery that is
used to retain your data after the product is turned off. The
backup battery is a consumable item. We recommend
your replace the backup battery before it is depleted,
otherwise data retained in memory will be lost. When the
backup battery needs to be replaced, "Low Battery" or "No
Battery" will appear on the display. In this case, contact
your Yamaha dealer and have qualified Yamaha service
personnel replace the backup battery. The average life of
the backup battery is approximately five years, depending
on operating conditions.
* The follow data are retained by the backup battery.
• Internal clock information
No other data relies on the backup battery, therefore no
other data will be lost if the backup battery is depleted.
• This product regularly saves the state of its workspace so
that it can return to the previous state when the product is
turned on. To ensure that the state is saved properly, wait at
least 10 seconds after performing the last operation before
turning the product off.
Connectors
• XLR-type connectors are wired as follows (IEC60268
standard):
pin 1: ground, pin 2: hot (
+
), and pin 3: cold (
–
).
Information
• Copying of the commercially available musical data
including but not limited to MIDI data and/or audio data is
strictly prohibited except for your personal use.
• The illustrations and LCD screens as shown in this manual
are for instructional purposes only, and may appear
somewhat different from those on your device.
• Windows is a registered trademark of Microsoft®
Corporation in the United States and other countries.
• Apple, iOS, iPad and iPod are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
Information for Users on Collection
and Disposal of Old Equipment
This symbol on the products,
packaging, and/or accompanying
documents means that used
electrical and electronic products
should not be mixed with general
household waste.
For proper treatment, recovery and
recycling of old products, please
take them to applicable collection
points, in accordance with your
national legislation and the Directives
2002/96/EC.
By disposing of these products correctly, you will help
to save valuable resources and prevent any potential
negative effects on human health and the environment
which could otherwise arise from inappropriate waste
handling.
For more information about collection and recycling of
old products, please contact your local municipality, your
waste disposal service or the point of sale where you
purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside
the European Union]
This symbol is only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
(weee_eu_en_01)
European Models
Purchaser/User Information specified in EN55103-1:2009 and
EN55103-2:2009.
Inrush Current: 5.6A (on initial switch-on)
4.9A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
