manualshive.com logo in svg

Yamaha SU-10, Руководство пользователя

Поделиться
Скачать
Yamaha SU-10 Скачать руководство пользователя страница 59

52

●

 Editing 

●

COMPACT

[

Compct   ?

]

Purpose

To 

compact a sample means to remove all of its leading and trailing waveform

data — that is, all waveform data existing ahead of the Start Point or Loop Point
(whichever is first), as well as all data existing after the End Point. By clearing this
extraneous data, you free some memory for additional recording. This operation
does not affect the sample’s current sound, since leading and trailing data are not
reproduced during playback. 

But once you have deleted this data, it is lost for-

ever, and cannot be restored by editing.

Pad

StPnt

EdPnt

Sample

Execute

Pad

StPnt

EdPnt

Sample

Procedure

1.

The LCD displays the following message, where 

xx identifies the currently

selected pad.

Compct
 

x x?

You are free to change the selection. To change the bank, press 

[BANK]

. To

change to a different sample within the same bank, press the corresponding
pad, or 

[+1]

 or 

[–1]

.

▼

If you do not wish to compact, press 

[>]

 or 

[<]

 to change to a different edit function, or else press

[EXIT]

 to return to PLAY mode.

2.

Press 

[ENTER]

 to execute. The LCD displays a confirmation query.

Cpt 

xx

 Sure?

3.

To execute, press 

[ENTER]

 again.

▼

If you do not want to execute, press 

[EXIT]

 instead. The SU10 returns to Step 1 above.

4.

The SU10 begins execution and displays the 

Keep PwrOn

 message. 

Do not

switch off power while this message is on the screen.

  When execution is

completed, the LCD briefly displays the 

Complete

 message, then returns to

the same prompt display shown in Step 1 above.

5.

To select another pad for compacting, repeat from Step 1 above. To return to
PLAY mode, press 

[EXIT]

.

Содержание SU-10


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды