Yamaha SU-10 Скачать руководство пользователя

Страница: 42 / 89

●

Recording Samples, and Creating Songs

●

Starting/Stopping the Recording

To start recording, press

[PLAY]

. If the recording trigger (

RecTrg

) is set to “manual,”

the SU10 starts recording immediately; otherwise it displays the

Waiting

mes-

sage and waits for the input level to reach the trigger level. During recording, the
LCD displays the word

Recording

, and the meter decrements to indicate the

remaining recordable time. You can end recording at any time manually, or else
continue to record until you run out of memory.

To end recording manually: Press

[STOP]

. The SU10 displays the

Finished

mes-

sage, then returns to PLAY mode.

If memory runs out:

The SU10 stops the recording, briefly displays the

Memory Full!

message, then returns to PLAY mode.

Do not switch off the power while the

Finished!

Memory Full!

message is on the LCD

as this may in some cases cause destruction of all internal data.

Creating Songs

To record a song, you (1) enter RECORDING mode and select the destination
song, (2) press

[PLAY]

to begin the recording, (3) press the pad sequence you want

to record as a song, (4) press

[STOP]

to end the recording. The procedure is de-

scribed below. For hints about song creation, refer to the “Creating Effective Songs”
on page 37.

• The SU10 has 4000 words (8KB) of dedicated song memory, sufficient for about 1000 pad and

button on/off events. The LCD indicates the amount of remaining memory as recording pro-
ceeds.

• The song recording function recognizes both pad action and MIDI IN action. It is possible to

record from MIDI input in place of (or in addition to) local pad play.

• You cannot record to a locked song. For information about song locks, see page 64.

Содержание SU-10


























































































Результаты поиска

Содержание SU-10

Отзывы:

Похожие инструкции для SU-10

Бренды по названию

Популярные бренды

Yamaha SU-10, Руководство пользователя

Результаты поиска

Содержание SU-10

Отзывы:

Похожие инструкции для SU-10

Бренды по названию

Популярные бренды