Yamaha SU-10 страница 35 Скачать руководство пользователя | Manualshive

Страница: 35 / 89

background image

28

●

Playback

●

3.

Press

[STOP]

to interrupt the playback.

4.

Press

[PLAY]

to resume playback from the point of interruption.

5.

Press

[STOP]

to interrupt playback again.

6.

Now try moving to different song locations. Press

[FWD/>>]

to move forward

through the song,

[BWD/<<]

to move back, or

[TOP]

to jump back to the top of

the song. (These operations are available only while song playback is stopped.)
The LCD meter always shows the current location in the song. You can begin
playing from any position by pressing

[PLAY]

.

ABOUT SONG PLAY

Song playback operates exactly as if you were playing the pads at the console
in real time. The only exception is that song action is never transmitted over MIDI
OUT. In all other respects, playing a song is functionally equivalent to pressing and
releasing the corresponding pads.

• You are free to combine pad play with song play. But you should avoid pressing a

pad while the corresponding sample is being sounded from within a song, since
this will cause the song sample to shut off.

• Song playback is available with FILTER, CROSSFADE, and PITCH play. These

effects apply to song samples just as they do to pad-played samples.

• Avoid using

[HOLD]

while a song is sounding, as the HOLD action will apply to

the sounding samples. Since HOLD acts as a toggle switch, it may cause some
samples to stay on too long while shutting others off immediately.

• Stopping a song at midpoint switches off all currently playing song samples. If

you then restart from the same point, the interrupted samples do not resume. In
general, the sound at any given timepoint within the song (as indicated by the
time meter) may vary according to where you started the replay.

• The SU10’s polyphony determines the maximum number of sounds that can play

out at once. Playing a song with FILTER or SCRATCH, or at HI sampling grade,
may cause some of its sounds to drop out. Combining pad and song action may
also cause sounds to drop out.

• If you edit or delete any of the samples used by the song, the song’s sound changes

accordingly.

«
...
33
34
35
36
37
...
»

Содержание SU-10


























































































Отзывы:

Нет отзывов

Похожие инструкции для SU-10

Бренд: ABB Страницы: 6

Бренд: Walker Bay Страницы: 8

Бренд: GE Страницы: 802

Бренд: iET Страницы: 17

Бренд: XTA Страницы: 29

Бренд: vc999 Страницы: 59

Бренд: Qtx Страницы: 3

Бренд: Saferoad Страницы: 24

Бренд: Xoop Lighting Страницы: 20

Бренд: Vari Lite Страницы: 132

Бренд: Bard Страницы: 36

Бренд: Bard Страницы: 2

Бренд: Bard Страницы: 30

Бренд: Bard Peripheral Vascular Страницы: 44

QNET Physics and Dynamics

Бренд: Quanser Страницы: 4

Бренд: Tripp Lite Страницы: 24

WEIDER SHAPE GLIDER WECR43062

Бренд: ICON Health & Fitness Страницы: 6

Бренд: Duracell Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды