Yamaha RX-17, Уполномоченное руководство по продукции

Страница: 25 / 47

20
You now have another chance to cancel this operation, by pressing –1 NO. The LCD
will return to the previous display, allowing you to select another Job.
3. To carry out the Delete operation, press +1 YES again. The LCD will show
then return to the Delete display, allowing you to select another Job.
4. If you wish to continue editing, press START. The LCD will show the Part
FOLLOWING the Part that was deleted. In our example, this will be Part 003,
containing Pattern 03.
3.2.10 JOB 5: INSERT PART
The lnsert Function does the opposite of the Delete Function–it lets you select any
point in a Song that has already been assembled, and insert new Parts between the
already-programmed Parts. For example, if you want to insert a Part between Parts 2
and 3 of a Song, this means that you have to insert a new Part 3.
BEFORE INSERTING
AFTER INSERTING
You can also insert Repeats, Tempo Changes and Volume Changes.
1. After selecting a Song and entering Edit Song, press JOB, then select Job 5.
You can now, if you wish, cancel this operation and return to the Edit Song display,
by pressing
START.
2. Use the Numeric Key Pad to select the number of the Part you wish to insert, then
press +1 YES. For example, Part 003.
3. You can now enter any data in the new Part 003, in the normal way by moving the
brackets to the desired type of data, and entering the data value. For example.
Pattern 99.
4. The new Part is now entered. You can now continue editing or press SONG or STOP/
CONTINUE to exit Edit Song.
3.3 CLEAR SONG
You can instantly clear (erase) a whole Song. This would be done, for example, if the
RX17’s Song memory were full and you wanted to write another Song.
1. After selecting the Song you wish to clear, select Function 3.
At this point, you can press SONG to return to the Select Song display, if you do
NOT wish to clear the Song.
2. Press +1 YES to continue this operation.