manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSEW, Руководство пользователя, Страница: 68 / 158

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 68

 

7-10

 

1

2

3

4

5

6

7

8

9

10

11

 

Modifications

 

EWB01000 

 

Exhaust system

 

The exhaust system on the ATV is very hot during
and following operation. To prevent burns, avoid
touching the exhaust system. Park the ATV in a
place where pedestrians or children are not likely
to touch it.

 

EWB01010 

WARNING

 

POTENTIAL HAZARD
Operating this ATV with improper modifica-
tions.
WHAT CAN HAPPEN
Improper installation of accessories or mod-
ification of this ATV may cause changes in
handling which in some situations could lead
to an accident.

 

HOW TO AVOID THE HAZARD
Never modify this ATV through improper in-
stallation or use of accessories. All parts and
accessories added to this ATV should be
genuine Yamaha or equivalent components
designed for use on this ATV and should be
installed and used according to instructions.
If you have questions, consult an authorized
ATV dealer.

WARNING

 

POTENTIAL HAZARD
Hot exhaust system.
WHAT CAN HAPPEN
Dry grass or brush or other combustible ma-
terial accumulated around the engine area
could catch fire.
Someone touching the exhaust system dur-
ing or after operation could be burned.

Содержание Raptor 700R YFM70RSEW































































































































































Отзывы:

Нет отзывов