manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSEW, Руководство пользователя, Страница: 46 / 158

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 46

 

5-6

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU19761

 

Throttle lever 

 

Check the operation of the throttle lever. It must
open smoothly and spring back to the idle position
when released. Have a Yamaha dealer correct if
necessary.

 

EBU19770

 

Drive chain 

 

Check the condition of the drive chain and check
the drive chain slack. Lubricate and adjust the
drive chain as necessary. (See page 8-33.)

 

EBU19781

 

Tires 

 

EWB00561 

WARNING

 

POTENTIAL HAZARD
Operating this ATV with improper tires, or
with improper or uneven tire pressure.
WHAT CAN HAPPEN
Use of improper tires on this ATV, or opera-
tion of this ATV with improper or uneven tire
pressure, may cause loss of control, increas-
ing your risk of accident.

HOW TO AVOID THE HAZARD

 

●

 

The tires listed below have been approved
by Yamaha Motor Co., Ltd. for this model.
Other tire combinations are not recom-
mended.

Front:

Manufacturer/model:

DUNLOP/KT341 Radial

Size:

AT21 x 7-10

Type:

Tubeless

Rear:

Manufacturer/model:

DUNLOP/KT345 Radial

Size:

AT20 x 10-9

Type:

Tubeless

Содержание Raptor 700R YFM70RSEW































































































































































Отзывы:

Нет отзывов