manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSEW, Руководство пользователя, Страница: 126 / 158

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 126

 

8-39

 

1

2

3

4

5

6

7

8

9

10

11

Right side

 

EBU25212

 

Battery 

 

This model is equipped with a sealed-type (MF)
battery, which does not require any maintenance.
There is no need to check the electrolyte or to add
distilled water. Check and, if necessary, tighten the
battery lead connections.

CAUTION:

 

ECB00620 

 

Never attempt to remove the battery cell seals,

 

as this would permanently damage the battery.

 

EWB02140 

 

1.  Upper grease nipple
2.  Lower grease nipple

1

2

WARNING

 

POTENTIAL HAZARD
Failure to handle batteries or battery electro-
lyte carefully.
WHAT CAN HAPPEN
You could be poisoned. You could be severe-
ly burned by the sulfuric acid in battery elec-
trolyte. Batteries produce explosive gases.
HOW TO AVOID THE HAZARD
Avoid contact with skin, eyes or clothing. Al-
ways shield eyes when working near batter-
ies. Keep out of reach of children.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of water or
milk. Follow with milk of magnesia, beaten
egg or vegetable oil. Get prompt medical at-
tention.
EYES: Flush with water for 15 minutes and
get prompt medical attention. Keep batteries
away from sparks, flames, cigarettes or other
sources of ignition. Ventilate when charging
or using in a closed space.

Содержание Raptor 700R YFM70RSEW































































































































































Отзывы:

Нет отзывов