manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSEW, Руководство пользователя, Страница: 64 / 158

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 64

 

7-6

 

1

2

3

4

5

6

7

8

9

10

11

 

EWB00930 

 

Pre-operation checks

 

Always perform the pre-operation checks listed on
page 5-1 before riding for proper care of the ATV
and to ensure safety.

 

EWB00940 

EWB00950 

WARNING

 

POTENTIAL HAZARD
Operating this ATV after consuming alcohol
or drugs.
WHAT CAN HAPPEN
Could seriously affect your judgment.
Could cause you to react more slowly.
Could affect your balance and perception.
Could result in an accident.
HOW TO AVOID THE HAZARD
Never consume alcohol or drugs before or
while driving this ATV.

WARNING

 

POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibility of an accident or
equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition.
Always follow the inspection and mainte-
nance procedures and schedules described
in the Owner’s Manual.

WARNING

 

POTENTIAL HAZARD
Operating this ATV with improper tires, or
with improper or uneven tire pressure.

Содержание Raptor 700R YFM70RSEW































































































































































Отзывы:

Нет отзывов