Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 158

Yamaha Raptor 700R YFM70RSEW Скачать руководство пользователя страница 137

8-50

1

2

3

4

5

6

7

8

9

10

11

Engine overheating

EWB02270

NOTE:

If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the rec-

ommended coolant as soon as possible.

WARNING

POTENTIAL HAZARD
Removing the radiator cap when the engine and radiator are still hot.
WHAT CAN HAPPEN
You could be burned by hot fluid and steam blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before removing the radiator cap. Always use a thick rag over the cap.
Allow any remaining pressure to escape before completely removing the cap.

Wait until the
engine has cooled.

Check the coolant level in the
reservoir and radiator.

The coolant level
is OK.

The coolant level is low.
Check the cooling system
for leakage.

Have a Yamaha dealer check
and repair the cooling system.

Add coolant. (See NOTE.)

Start the engine. If the engine overheats again, have a
Yamaha dealer check and repair the cooling system.

There is
leakage.

There is
no leakage.

«
...
135
136
137
138
139
...
»

Содержание Raptor 700R YFM70RSEW































































































































































Отзывы:

Нет отзывов