Controls and functions
7
En
INTR
ODUCTION
Controls and functions
English
1
PHONO jacks
For connecting to a turntable (p.10).
2
OPTICAL 1-2 jacks
For connecting to audio components equipped with
optical digital output (p.10).
3
ANTENNA terminals
For connecting to FM and AM antennas (p.12).
4
COAXIAL 1-2 jacks
For connecting to audio components equipped with a
coaxial digital output (p.10).
5
SPEAKERS terminals
Used to connect speakers (p.11).
6
NETWORK jack
For connecting to a network (p.13).
7
DC OUT jack
For supplying power to a Yamaha AV accessory. For
details on connections, refer to the instruction manual of
the AV accessory.
8
Power cable
For connecting to an AC wall outlet (p.13).
9
LINE 1-3 jacks
For connecting to analog audio components (p.10).
0
CD jacks
For connecting to a CD player (p.10).
A
SUBWOOFER PRE OUT jack
For connecting to a subwoofer with built-in amplifier
(p.10).
B
REMOTE IN/OUT jacks
When you have another Yamaha component supporting
remote connection, as this unit does, an infrared
transmitter is not necessary. You can transmit remote
signals by connecting an infrared receiver and the
REMOTE IN jack of the other component to the
REMOTE IN/OUT jacks of this unit, using cables with
monaural miniplugs.
Up to six Yamaha components (including this unit) can be
connected.
Rear panel
:
B
A
9
1
2 3
4
6
5
7
8
REMOTE
IN
OUT
Yamaha component
(up to six components
including this unit)
Infrared receiver
Remote control
Rear panel of R-N500
