Controls and functions
4
En
1
A
(power)
Turns on/off (standby) the unit.
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
2
Power indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
3
Remote control sensor
Receives infrared signals from the remote control.
Switch the remote control ID between ID1 and ID2 when using
multiple Yamaha receivers or amplifiers (p.34).
4
DIMMER
Changes the brightness level of the front display. Choose
brightness from 5 levels by pressing this button
repeatedly.
y
This setting is retained even if you turn off this unit.
5
DISPLAY
Selects the information displayed on the front display
(p.29).
6
MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (p.18).
7
CLEAR
Clears a FM/AM preset station when TUNER is selected
as the input source (p.19).
8
Front display
Shows information about the operational status of this
unit.
9
PRESET
j
/
i
Selects a preset FM/AM station when TUNER is selected
as the input source (p.19).
0
FM and AM keys
Switch between FM and AM (p.17).
A
TUNING
jj
/
ii
Selects the tuning frequency when TUNER is selected as
the input source (p.17).
B
PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound (p.14). The indicator above it lights up and the front
display turns off when this function is turned on.
C
PHONES jack
Outputs audio to your headphones for private listening.
D
SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed.
E
USB jack
For connecting a USB storage device (p.23) or an iPod
(p.21).
Controls and functions
Front panel
M
D
F
E
G
H
J
I
K
L
C
12
3
4 5 6 7 8 9
:
A
B
Note
Note