Controlling external devices with the remote control
36
En
You can use the unit’s remote control to operate external devices (such as CD players) if you have registered the remote
control code of the external device.
• You cannot control an external device that does not have a remote control sensor.
• Ensure that the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control operations may
not work properly.
• If the unit’s remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert
new batteries and register the codes again.
You can use the unit’s remote control to operate a TV if
you have registered its remote control code.
y
You can also register your TV’s remote control code to the unit’s
input selection keys (p.37). This would allow you to use the
cursor keys or numeric keys to operate the TV (this function may
not be available on some TV models).
1
Refer to “LIST OF REMOTE CONTROL
CODES” (end of this manual) to find your
TV’s remote control code.
y
If there are multiple remote control codes, register the first code
in the list. If that does not work, try the other codes.
2
Press CODE SET using a pointed object such
as the tip of a ballpoint pen.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this
happens, repeat from Step 2.
3
Press TV
A
.
4
Use the numeric keys to enter the 4-digit
remote control code.
Once the remote control code is successfully
registered, “Rem: Success” appears on the front
display.
If “Rem: Fail” appears on the front display,
registration has failed. Repeat from Step 2.
■
TV operations
Once you have registered the remote control code for your
TV, you can control it using the TV operation keys,
regardless of the input source selected on the unit.
Controlling external devices with the remote control
Notes
Registering the remote control
code for a TV
CODE SET
TV
A
TV INPUT
TV VOL
TV CH
TV MUTE
TV
1
2
3
4
5
6
7
8
9
0
10
ENT
+
SOURCE
ID
RECEIVER
CODE SET
SLEEP
DIMMER
SPEAKERS
A
B
COAX1
COAX2
OPT1
OPT2
Numeric keys
TV operation keys
TV
operation
keys
INPUT
Switches the video inputs of the TV.
MUTE
Mutes the audio output of the TV.
TV VOL
Adjust the volume of the TV.
TV CH
Switch the channels of the TV
TV
A
Turns on/off the TV.