manualshive.com logo in svg

Yamaha QY 300, Руководство пользователя

Поделиться
Скачать
Yamaha QY 300 Скачать руководство пользователя страница 21

The Mark/Jump Function

The mark/jump function lets you “mark” (memorize) up to 10 locations within
the current song and “jump” to any one of the marked locations in one easy
step.

Marking a Location

To mark the current location, press the 

[F4] 

function key (“Mark”). This calls

the Mark/Jump display.

When the Mark/Jump display appears, make sure the cursor is located at a
clear number (“2” in the example display above) and press 

[ENTER]. 

This

records the current measure/beat location in the specified Mark/Jump number,

and returns you to the SONG mode.

Jumping to a Marked Location

To jump to a marked location, press the 

[F6] 

key (“Mark”) from any other

location, move the cursor to the appropriate Mark/Jump number (or enter the
Mark/Jump number via the numeric keypad), and press 

[ENTER]. 

You will

immediately be returned to the SONG mode at the specified location.

Clearing a Marked Location

To clear a marked location go to the Mark/Jump display, move the cursor to
the Mark/Jump number you want to clear, and press the 

[F1] 

function key

(“Clear”).

11

Содержание QY 300

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды